Dynamic Measurement Module

The Dynamix 1444 Series dynamic measurement module is a four-channel, general purpose monitor that provides measurements of dynamic inputs such as vibration and pressure as well as static inputs such as thrust, eccentricity and rod drop. The module also measures speed from two TTL signal inputs, or can read machine RPM from I/O. The module is designed for monitoring shaft, casing, and pedestal vibration, shaft and rod position, casing expansion and other critical dynamic and position measurements on rotating and reciprocating machinery.

Tachometer Signal Conditioner Expansion Module

The Dynamix 1444 Series tachometer signal conditioner expansion module is a two-channel monitor that converts the signal from common speed sensing transducers into a once-per-rev TTL class signal suitable for use by up to six dynamic measurement modules. The tachometer signal conditioner expansion module is designed for use with the dynamic measurement module which provides power and manages the module configuration through the backplane.

Relay Expansion Module

The Dynamix 1444 Series relay expansion module is a four-relay module that serves to add relays to the dynamic measurement module. Up to three relay expansion modules may be used with each dynamic measurement module.

Analog Output Expansion Module

The Dynamix 1444 Series analog output expansion module is a four-channel module that outputs 4-20mA analog signals that are proportional to measured values provided by the dynamic measurement module. The analog output expansion module is designed for use with the dynamic measurement module.

Terminal Bases

Each Dynamix module must be installed in a terminal base, when linked together with ribbon cable, serves as the backplane of the 1444 Series system. There are two types of terminal bases – one for the dynamic measurement module and one for the expansion modules.